hello world!

How to Prepare for Flooring Installation

Flooring installation is a big project, and one that you shouldn't take lightly. When it comes to flooring installation, there are many things you need to prepare for before the work can commence. So how do you prepare? This blog post will show you five of the most important aspects of preparing for flooring installation so that your experience goes smoothly and without any unpleasant surprises!

Remove All Furniture From the Room

This may seem like a no-brainer, but it's important to prepare your home or office before flooring installation. You'll need to move any items you have that are sitting on top of carpet onto shelves or in closets. This includes couches and chairs (or anything else) so they won't be damaged when the workers roll out new carpets while taking away old ones. You also might want to consider moving smaller pieces of furniture off the ground floor if possible too! It can make sweeping up dust much easier later on down the line for both you and your installer.

Put up a New Wall or Partition if You Have to Divide up the Space

If you need to divide up the space, prepare for flooring installation by putting up a new wall or partition. You'll also want to consider how many walls will be installed in order to prepare for this work! It's important that your installer has access to all of the necessary tools and equipment they might need so it would be best if their setup is relatively simple - but don't worry too much about it when preparing because they should have everything covered.

Cover Your Floor with Plastic and Tape it Down

If installing carpeting, prepare for flooring installation by covering your floors with plastic and taping them down before getting started. This helps keep any dust from spreading throughout while you prepare and put your room back together. You'll also want to cover any area rugs in the space too for this reason!

Remove Baseboards and Door trim

Once you've covered all of the floors with plastic and taped it down, prepare for flooring installation by removing any unnecessary trim. This includes things like baseboards or exterior doors if they're installed - just make sure that everything is covered before work begins.

If covering carpeting, prepare for flooring installation by moving furniture away from walls so workers have enough access to get around easily later on while installing new carpets without damaging anything else throughout the home or office. It's important not to place items near any walls or molding too!

If you're replacing carpet, prepare for flooring installation by removing any old carpets and padding. This will make it easier to install the new ones later on as well as keeping your home or office cleaner while work is being done. It'll also help with air quality and reducing dust when installing new floors!

Disconnect wires for light fixtures

Before getting started, prepare for flooring installation by disconnecting wires from light fixtures so they won't get damaged during removal of drywall and insulation - especially if there are exposed wires around where electrical outlets are located. You may need an electrician's assistance here depending on what type of wiring you have.

Conclusion

Flooring is a like a giant task and you need to do everything in advance the floor installers arrive. So, if you apply the above tips in advance it won't take time to install the new floor.

If you need to prepare for flooring installation, here are some things that might help! Remember there's no right way of doing this so do what feels best - just make sure everything is covered and ready before starting the work.

Copyright © 2020 FlooringPRO. All rights reserved.